Trigger Cables
Explore the CameoGear range of camera and lens accessories.
CameoGrip Handgrip
Info:
CameoGrip is a retro-style, electronic handgrip that can mount Bolex-style under a small camera, be used with the included rosette adapter as a handgrip with an over-the-shoulder camera, or be used with a third party clamp as a pan-arm grip. It can control cameras that support the LANC remote control protocol as well as Sony cameras with a Multi-Terminal port.
Functions include run/stop, zoom control, iris control (on LANC cameras) and other functions that can be assigned using a software interface over USB.
Read more in depth information on our CameoGrip feature page.
Controls:
• (2)x Axis joystick for controlling any (2) of zoom, iris or focus
(depending on camera and lens compatibility)
• Run/Stop button to start/stop recording
• (2)x programmable buttons
Connectors:
• (1)x 8-pin Hirose connector for connecting to camera
Item Code
CameoGrip with LANC Cable CAM-075-200-L
CameoGrip with Multi-Terminal Cable CAM-075-200-M
Firmware and Support
Full Specs
Manual
Camera Accessories
Lens Accessories
Accessories:
CameoGrip LANC Cable is a LANC to Hirose 8-pin cable for LANC-Enabled cameras.
Item Code CAM--075-230
Item Code CAM--075-220
Item Code CAM-VLOK-100
Info:
The Cameo V-Lock Kit provides quick and secure mounting of your camera accessories using the industry-standard V-Lock mounting system. Comprised of male and female V-Lock components, the V-Lock Kit is constructed of precision-machined aluminum and stainless steel, and features two methods of safety locking. Both units allow for attachment to accessories from either the front or the back, without the need for disassembly.
• Multiple mounting positions
• Safety latch prevents accidental release
• Lever release by either a push or pull motion
• Compatible with any third-party V-Lock components
• Captive 1/4-20 screws and ARRI Ring included
• 2.25"W x 1.75"H x 3.5"L, 4oz
Cameo V-Lock Kit
Info:
The Cameo Swivel Mount for on-board monitors enables a monitor to be mounted on the top or side of your camera with tilt and swivel positioning.
• 3lb maximum payload
• Top or side mounting options
• Packaged with on Insole and one 1/4" 20-3/8" bushing
• 7/8"W x 1 1/8" D x 1 5/8"H, 0.8 oz
• Aluminum
Cameo Swivel Mount
Accessories:
The Insole, made of stainless steel, enables installation of swivel mount to a standard hot or cold camera shoe.
• 3/4"L x 3/4"W, 0.2 oz
• Accepts 1/4"-20 short screw
Accessories:
The Cameo ARRI Ring for V-Lock is a stainless steel washer with two locating pins to prevent rotation of a Cameo (Female)
V-Lock receiver when mounted on ARRI
cameras and accessories.
• 5/8"W x 5/8" L x 1/4" H
• 0.8oz
Female Cameo V-Lock Receptacle with captive, countersunk 1/4"-20 slotted screw.
Replacement piece.
Male Cameo V-Lock Receptacle with captive, countersunk 1/4"-20 slotted screw.
Replacement piece.
Item Code CAM-VLOK-130
Item Code CAM-VLOK-101
Item Code CAM-VLOK-102
Item Code CAM-082-100
Item Code CAM-VLOK-210
Info:
The Cameo 2x4 V-Plate offers a quick and secure mounting solution for compatible wireless transmitters and receivers.
• 9"W x 7"H x 11"L, 6.4 oz
• Male V-Lock
• 2.25" x 4" Delrin plate
Compatible with:
• Preston MDR4
• PARALINX Triton
• PARALINX Arrow-X
• PARALINX Tomahawk HD Video • Transmitter
• IDX CW-3 Wireless 3G-SDI • Transmission System
• ARRI UMC-4
• Amimon CONNEX Wireless
• HDMI HD Link for UAV
• Teradek old series (transmitter only)
• Teradek new series (transmitter only)
• 300, 600, 2000,
• Beam (receiver only)
Cameo 2x4 V-Plate for
Wireless Transmitters
Item Code CAM-VLOK-120
Info:
The Cameo 4x5 V-Plate offers a quick and secure mounting solution for compatible wireless receivers and transmitters.
• 6"W x .75"H x 7"L, 3.2 oz
• Male V-Lock
• 2.25" x 4" Delrin plate
Compatible with:
• Preston MDR-3 Motor Driver for FIZ System
• PARALINX Tomahawk HD Video Transmitter/Receiver
System - SDI (receiver only)
• Anton Bauer Gold Mount Plate
• Amimon CONNEX Wireless HDMI HD Link for UAV
(receiver only)
• Teradek old series (receiver only)
• Teradek new series (receiver only)
• (300, 600, 2000,
• Beam (receiver only)
Cameo 4x5 V-Plate for
Wireless Receivers
Cameo Chico Clamp for 15mm
Info:
The Cameo Chico Clamp provides multiple options for mounting accessories to 15mm rods.
• 2.5"W x 1.5" H x 2.5"L, 2.4 oz
• Compatible with CameoGear V-Lock & Monitor Accessory Plate
• Offers 1/4-20 mount points on the side, includes self-retaining
1/4-20 screw
• Allows mounting of 15mm rod to any surface with 1/4-20 hole
• Aluminum
Item Code CAM-CHIC-200
Item Code CAM-LDON-025
Info:
The Cameo lens donuts easily slide over the lens, blocking light out between the lens and the mattebox.
• 10.25" W x .25"H x 11.25"L
• 215mm outer diameter / 62 mm inner diameter
• 4.8oz, constructed of 1/4" thick neoprene
Info:
The Cameo lens donuts easily slide over the lens, blocking light out between the lens and the mattebox.
• 10.25" W x .25"H x 11.25"L
• 215mm outer diameter / 100 mm inner diameter
• 4oz, constructed of 1/4" thick neoprene
Cameo Lens Donut - Small
Cameo Lens Donut - Large
Item Code CAM-LDON-040